Analysis and solution of common failure of stone cutter

Stone cutting machine is a highly efficient stone equipment, widely used in the industry. Mechanical failure is a possible problem in production and use, which has a great impact on production efficiency and effect. So what is the cause of the failure of the stone cutting machine? How to solve it? We will explain it in detail for you today.

1. Slow speed

Reasons: 1. Belt is too loose 2. Blade sharpness is reduced 3

Solution: 1. Tensioning belt 2. Grinding saw blade with grinding wheel or hard firebrick 3

2, the motor is running, but the diamond saw blade does not turn or no load to load when it does not turn

Reasons: 1. Bad transmission gear; 2. Broken semicircle keys

Solution: 1. Replace the transmission gear; 2. Replace the semicircle key

3, stone saw blade swing

Reasons: 1. Bearing damage of output shaft; 2. 2. Wear of splint or diamond saw blade; 3. Poor installation of diamond saw blade (cutting blade)

Solution: 1. Replace the bearing; 2. 2. Replace the splint or diamond saw blade and reinstall the diamond saw blade.