Two kinds of correct operation method of cutting machine

The board splitter is generally in the electronic production industry all to a kind of mechanical equipment, mainly USES them to replace the artificial, and can efficiently increase the output of an industrial mechanical equipment.

The board splitter is generally in the electronic production industry all to a kind of mechanical equipment, mainly USES them to replace the artificial, and can efficiently increase the output of an industrial mechanical equipment.

Cutting machine can be divided into manual and automatic, manual is generally only one, and automatic can be divided into LED parting machine, guillotine type, knife type, automatic and so on, for these different equipment, its operation methods are different, the specific operation steps, today small make up with you to share.

The operation method of the manual pushing type board divider

Place the PCB board on the lower straight knife, and pay attention to clip the V groove on the lower straight knife edge. With manual operation, push the upper round knife along the pre-etched v-groove to cut and separate the connecting plate. The space between the lower straight knife and the upper guide plate can be adjusted to align with the pre-etched v-shaped slot, so that the cutting is accurate.

Operation method of LED board divider

1. When cutting the board, it is necessary to select two positions before stepping on the pedal switch, otherwise the cutter wheel will not operate. In case of any abnormality, press down the emergency switch quickly and release the pedal switch to prevent accidents. This safety instruction is applicable to SMT workshop. For the safety and reasonable use of LED sub-machine. Arrange designated personnel for maintenance.

2, attention should be paid to hand accessories, hair, loose clothing to avoid close to the upper and lower blade, so as not to cause safety problems.

3. It should be noted that the distributor is only used for the distributor. The operator should wear anti-static gloves according to the relevant regulations of the company.